Joyner JNSZ650DLB, Руководство пользователя и каталог запчастей

Страница: 31 / 146

Each time prior to starting the engine, check the throttle assembly to
ensure that when pedal is pushed all the way forward the assembly is
working smoothly and returns to idle when released. Do not operate if
pedal or engine throttle linkage fail to return to idle. If unable to correct
the problem through lubrication, adjustment or replacement of worn
parts, contact your dealer for assistance.
Before you start the engine, check that the parking brake is engaged,
and the gear shift lever is in neutral. Trying to start the engine in gear may
damage the starter motor, clutch or gearbox.
Release the key at once if the engine starts. Holding the key in start
position when the engine is running will cause damage to the starter
motor.
If the engine does not start after 10 seconds, a second attempt to start
the engine can be allowed. Improper operation will damage the engine.
Engine stop key
Stop key test.
Before driving this vehicle, test the Engine Stop key to assure that it is operating
properly. With the engine running, turn the key counterclockwise to the “off” position for
the engine to shut down.
Pre-Drive Inspection
Perform this pre-drive inspection every day before driving vehicle. If
not performed, serious damage to the vehicle or personal injury may
result.
1. Check for Engine Oil Level. Check for transmission Oil Level. Check for leaks, add oil if
required. (See page 35, Engine oil replacement, and page 36Transmission lubrication)
2. Check the coolant. Check for leaks, add the coolant if required. (See page36 Engine
Coolant)
3. Check for Fuel Level. Add fuel as necessary and do not overfill. Check for
leaks.(see Figure 3)