Joyner JNSZ250DN, Руководство пользователя

Страница: 13 / 83

12
IS YOUR VEHICLE READY TO DRIVE?
Before each drive, it is important to inspect your Go-Kart and make sure any
problems are away. A pre-drive inspection is necessary, not only for safety, but
also for comfort. because having a breakdown, or even a flat tire, can be a major
inconvenience.
If your Go-Kart has overturned or has been involved in a collision, do not
drive it until your dealer has inspected your Go-Kart, There may be damages or
other problems you cannot see.
Improperly maintaining this Go-Kart or failing to correct a problem before driving can
cause a crash in which you can be seriously hurt even die.
Always perform a pre-drive inspection before every drive and correct each problem.
Pre-drive Inspection
Check the following items before you get on the Go-Kart:
■
Engine Oil
Check the oil level and add oil if needed. Check for leaks.
■
Fuel
Check the fuel level and add fuel if needed. Also make sure the fuel fill cap
is securely fastened. Check for leaks.
■
Tires
Use a gauge to check the air pressure. Adjust if needed. Also look for signs
of damages or excessive wear.
■
Nuts & Bolts
Check the wheels to see that the axle nuts are tightened, Use a wrench to
make sure all accessible nuts; bolts, and fasteners are tight.
■
Under body & Exhaust System
Check for and remove any dirt, vegetation or other debris that could be fire
hazard or interfere with the proper operation of the Go-Kart.
■
Air Cleaner Housing Drain Tube
Check for deposits in the drain tube. If necessary, clean the tube and check
the air cleaner housing.
■
Leaks, Loose Parts
Walk around you Go-Kart and look for anything that appears unusual, such
as a leak or loose cable.
■
Lights
Make sure the headlight; brake light and taillight are working properly.