Joyner JNSZ250DN, Руководство пользователя

Страница: 19 / 83

18
d. Run you kart
Press the shift lever forwards to “L” position,
the cart will move forwards at low speed, “H”
position, high speed; “N” position, no speed;
and “R” position the cart will move backwards.
(Note: if the shift can’t engage, give a slight
throttle, then try it again)
If the shift engages press down the throttle
pedal slowly, the cart will accelerate.
(See Figure 2)
e. Operate lights
See figure 4, press down the button, the
corresponding light will run. And if move the
shift lever to “L” position, the “L” light will shine,
“H” position, the “H” light, “N” position, the “N”
light, and “R” position, the “R” light,
B.
Pre-Drive Inspection
Perform this pre-drive inspection everyday before driving vehicle. If not performed,
serious damage to the vehicle or personal injury may result.
a. Check for Engine Oil Level. Check for leaks, add oil if required.
b. Check for Fuel Level. Add fuel as necessary and do not overfill. Check for
leaks
c. Check for Brakes. Depress the rear brake pedal several times, and then
check for proper brake pedal free play. Make sure there is no brake fluid
leakage. Adjust if necessary.
d. Check Tires. Check tires condition and pressure. The pressure on both Front
and Rear tire is 42kpa and 56kpa.
e. Check Drive Chain. Check for drive chain’s condition and tension. Lubricate if
HIGHT BEAM HEADLIGHT
DIPPED BEAM HEADLIGHT
FOG LAMP
SHIFTER SHOW
TURNNING LIGHT
SHIFTER SHOW
Figure 4
Figure 3