JOVY Systems iSolder-40, Руководство пользователя

Страница: 9 / 15

9
Operating modes Guideline
Recognize the operating mode and solder station status by the led
indicator color and state.
Attention!
When the tip is disconnected from the hand piece, the controller gives a
continuous red light indication on the led indicator.
When the controller is active and sensing, the fast flashing Green Led will be
seen from time to time.
1)Heating up mode
When the tip is fully inserted into the hand piece, the
i
Solder-40 controller starts to
detect the tip.
The indicator of this state is a flashing green led.
2)Operating mode
When the tip is ready to be used the green led stop flashing and becomes steady green.
The indicator of this state is a steady green led.