JOVY Systems iSolder-40, Руководство пользователя

Страница: 13 / 15

13
Hints and Tricks

Tip oxidation removal:
Firstly, clean the tip using a wet sponge then clean with wire brush. Secondly, use
a tip re-activator chemical to remove hard residues and oxidation, and finally re-
tinning using solder wire (flux cored).

Make sure that the tip type is compatible to the application – as explained above
in tip selection section – with the solder material mass to avoid process failure,
tip damage and oxidation.

Apply the tip to small part of solder wire before you start soldering or de-
soldering.

Wet the sponge by distilled water.
Note: Sulfur and other minerals in Tap-water cause fast tip oxidation.

Keeping the tip clean and shine, enhances the sensitivity and performance of the
tip.