jotron TR-2600, Руководство по эксплуатации и установке

Страница: 12 / 61

82695
_Op&Ins MAN_TR2600_K 1-2
1.2 TR-2600 description
The transponder consist of:
1.2.1 Front board
The Front board consist of keyboard, LCD panel and four status lights for alarm, power, RX and
TX. The Front board communicates directly with the MMI micro controller at the Digital board.
The LCD panel displays all required information about static data, dynamic data, voyage related
data and short safety related messages. The information and messages are automatically updated
according to the necessary international standards.
1.2.2 Digital board
The Digital board consist of DSP section, Timer/MMI section, PC module and DGPS module.
DSP section
The DSP sections main task is to decode and code AIS.
Timer/MMI section
The Timer MMI section main task is to receive DGPS information and consider synchronisation of
the Tron AIS against the GPS system or against other transponders in the AIS system.
Embedded Controller(EC)
The EC module is the communication centre for the Tron TR-2600 Transponder: analysing data,
building and controlling data base, communication with external units and controlling RX and TX
messages into the right time slots.
DGPS module
The DGPS board receive GPS information from the GPS network. The internal GPS is a 12 channel
all-in-view receiver with a differential capacity, and provides UTC reference for system
synchronization to eliminate synchronisation problems among multiple users.
1.2.3 RF board
The RF board consist of three receiver units and one transmitter unit.
Two of the receiver units are TDMA receivers. One of the receiver units is dedicated to receive
DSC messages. The transmitter unit is transmitting TDMA messages.
1.2.4 Power board
The Power board consist of a DC/DC converter giving the necessary internal voltages to operate the
TR-2600.