jotron TR-2600, Руководство по эксплуатации и установке

Страница: 43 / 61

82695
_Op&Ins MAN_TR2600_K 5-12
Select “Config” menu by pressing numeric key [5] or [arrow down] key and press [Enter ] key.
5.5.6 Config Menu
When entering a submenu in the “Config menu” you have to enter password 2. When the password
is accepted you have access to all parameters in the “Config menu”. If you escape from the “Config
menu” you have to re-enter the password to change the parameters.
Select “I/O ports.” menu by pressing numeric key [1] or [arrow up/down] keys and press [Enter ]
key.
Press [Enter] key or numeric key [1] to select data speed .
This menu allows the setting of data speed at port1 to port 6 of 4800 b/s or 38400 b/s.
Press [Enter] key to select “P1”.
When you try to change setting of an I/O port, you must enter password 1
Menu: Config 1/3
1 I/O Ports
2 Buzzer
3 Change Password
Menu: I/O Ports 1/3
1 Speed
2 Own IP address
3 BSC IP address
Menu: I/O Ports - Sp 1/6
P1 (Sensor1) 4800
P2 (Sensor2) 4800
P3 (Sensor3) 4800
P4 (ext.disp.) 38400
P5 (Pilot)
38400
P6 (Spare) 38400
P1 (Sensor1)
4800

=4800

=3840
Enter Password 1
----------