Jorc KAPTIV-CS-D-LUX, Инструкция по установке и обслуживанию

Страница: 10 / 12

10
TECHNICAL SPECIFICATIONS
Max. compressor capacity 100 m³/min. 3500 cfm.
Min. / Max. system pressure 0 Bar / 16 Bar 0 Psi / 230 Psi
Min. / Max. medium temperature 1° C / 50° C 34° F / 122° F
Valve type 2/2 way, direct acting
Valve orifice 4 mm 0,157”
Inlet conn height 1/2" BSP or NPT, 11 cm (top) and 7.5 & 1.5 cm (side)
1/2" BSP or NPT, 4.3” (top) and 2.9” & 0.6” (side)
Outlet conn height 1/4" BSP, 1.5 cm (side) 1/4" BSP, 0.6” (side)
Valve seals FPM
Supply voltage options 230VAC or 115VAC or 24VAC or 24VDC (See label on unit!)
Connectors DIN 43650-B
Serviceable valve Yes
TEST feature Yes
Environmental protection IP65 (NEMA4)
Integrated mesh strainer Yes
Alarm feature type Contact output switch (voltage free) available in two versions: A1 and A2
A1 = Normally open contacts, closed when in alarm phase. Light on the
drain is OFF when in operation and ON when in alarm mode.
A2 = Normally closed contacts, open when in alarm phase. Light on the
drain is ON when in operation and OFF when in alarm mode.
Alarm feature specification Max. 230VAC, max 4A, 1000VA
or 200VDC, 100W and min 5VDC, 100mA