Ergo Caboose Instruction Manual
Installing/Removing the Front
Wheels
• Tilt the stroller backward, on a clean surface, so that
it rests on the handlebar and the rear wheels.
• Take one of the front wheels and insert the post
into the front wheel housing until an audible click is
heard. See Figure 6.
• Pull outward on the wheel to ensure the wheel is
installed properly.
• Repeat this procedure for the other wheel.
• To remove a front wheel, insert your finger into the
cavity above the wheel. Find and press the release
tab, and pull the front wheel off. See Figure 7.
Figure 6
Front Wheel Locks
The front wheels can be either in swivel mode or
locked mode.
• To put each front wheel in its locked mode, pull up
on the locking tab until an audible click is heard.
Rotate the wheel until it locks automatically when
in the straight position and another audible click is
heard. See Figure 8.
• To unlock each wheel and put it into swivel mode,
push down on the tab until an audible click is heard
to disengage the lock.
Figure 8
Installing/Removing the Rear
Wheels
• To install, take one rear wheel and insert it into
the hub at the outside rear of the stroller until an
audible click is heard. See Figure 4.
• Pull outward on the wheel to ensure it is installed
properly.
• Repeat this procedure on the other side.
• To remove a rear wheel, press the button on the
underside of the platform while pulling the wheel
away from the hub. See Figure 5.
Figure 4
Figure 5
Pg. 3
Figure 7
