Ergo Caboose Instruction Manual
!
WARNING
NEVER allow a rear seated child to use the canopy as a hand hold.
Using the Rear Bench Seat
If using the rear bench seat, you must first remove the
car seat carrier support if in use. See page 14.
• To use the bench seat, first gently pull up on the seat
to be sure it is locked into place on the tubing.
• Unlatch the waist buckle by squeezing the latch
releases on both sides of the buckle and removing
the male ends of each buckle.
• Have the child sit on the bench seat facing back-
ward with their feet on the platform.
• Place the crotch strap between the child’s legs.
Then, bring the seat belt around the child’s waist
and insert the male ends of the waist buckle into
the female buckle. Ensure that they snap into place.
Tighten the waist belt to be snug around the child’s
waist. See Figure 30.
• Be sure that BOTH of the child’s feet are on the
platform and their hands are holding the handles at
all times.
NOTE: The seat is designed to flip up to allow for
easy access to the storage basket. To lift the seat,
squeeze the release mechanism on the underside of
the rear of the seat and rotate it upward. See Figure
31.
• There are 3 rear positions for the bench seat. Rotate
the seat to its most rearward position for maximum
storage. Rotate the seat to the straight up position
for more standing room and more storage. Rotate
the seat down into its locked position for a seated
child or maximum standing room. See Figure 32.
• Be sure that the seat is secure in the down position
before using the stroller.
Figure 30
Figure 31
Storage Basket
The maximum weight that can be carried in the
storage basket is 10 pounds. Excessive weight may
result in a hazardous unstable condition. Note that the
basket can be removed if desired by unclipping the
six attachment snaps.
Pg. 10
Figure 32
