Jonix steel 1C, Руководство по эксплуатации и обслуживанию

Страница: 33 / 96

33
JO NIX
steel
32
31
The only part that is subject to wear is the ionising tube, whose performance drops over time.
Components must be replaced when signs of wear appear, indicated by oxide on the internal
mesh of the ionising tube, which will make it turn white, and by the glass looking dull.
The
JO NIX
steel 2C/4C/2F/4F
devices, are designed to indicate, through a special LED, the
need to replace the ionising tubes approximately every 14000 hours of operation.
7.3 SPECIAL MAINTENANCE
In
JO
NIX
steel 2C/4C/2F/4F
versions substitute the ionising tubes every time the
specific LED lights up (permanent yellow light). Generally the substitution of the
tubes should take place within 18 months of using.
Remove the plug connected to
the mains.
7.3.1 Replacing the ionising tubes JO NIX
steel 1C
Fig. 31: Switch the device off by turning
the luminous On/Off switch to O.
Fig. 32: Unscrew the fixing screw and
remove the frontal cover from the device.