Jonix steel 1C, Руководство по эксплуатации и обслуживанию

Страница: 30 / 96

30
JO NIX
steel
22
23
Fig. 22: Gently screw the ionising tube
holding on to the base (green part), holding
it in vertical position with the other hand
and inserting it in the shaped profile of the
condenser support plate.
If the operation is difficult to perform, pull
slightly the earthing bracket so that it does
not make contact with the surface of the
tube.
aTTenTIon: do not overtighten the screw
after reaching its end stop.
check that the earthing spring
is in contact with the outer
mesh once the ionising tubes
have been screwed back into
place. otherwise contact the
manufacturer.
Fig. 23: Replace the cover and rescrew
with the appropriate screws.
Clean the outside of the device with a
damp cloth, using specific products for the
cleaning of stainless steel.
Do not use liquid cleaners or
sprays, soap or the like.