Jonix steel 1C, Руководство по эксплуатации и обслуживанию

Страница: 26 / 96

26
JO NIX
steel
13
14
12
To clean the tube follow the operations described from figure 5 to figure 7.
If the operation is difficult
to perform, pull slightly the
earthing bracket so that it does
not make contact with the
surface of the tube
.
Fig. 14: Gently screw the ionising tube
holding on to the base (green part).
If the operation is difficult to perform, pull
slightly the earthing bracket so that it does
not make contact with the surface of the
tube.
aTTenTIon: do not overtighten the screw
after reaching its end stop.
check that the earthing spring
is in contact with the outer
mesh once the ionising tubes
have been screwed back into
place. otherwise contact the
manufacturer.
Fig. 12: Unscrew the fixing screw and
remove the frontal cover from the device.
Fig. 13: Gently unscrew the ionising tubes,
using the green plastic base.