XBASE 999 Operating Manual
49
Q Right
<Q_R>
<000-127>
Controls the Q (quality or bandwith) of the right filter. The higher the
Q, the more narrow-banded or sharp the fiter is at its cutoff.
Hello999 OOOFilt PerfOO1
Q_L 1O1 Q_R 127 Ed B123
Resonance Left
<Res_L>
<000-127>
Controls the resonance of the left filter.
Hello999 OOOFilt PerfOO1
ResL000 ResR000 Ed B123
» Note
: The filter only starts to self-oscillate if Q was adjusted to a value
equal or greater than about <
060
> (depending on some analog tolerances).
If Resonance is high, the Q value will also control the depth of resonance.
Resonance Right
<Res_R>
<000-127>
Controls the resonance of the right filter.
Hello999 OOOFilt PerfOO1
ResL000 ResR000 Ed B123
Filter Mode Left
<MdeL>
<LP/HP/BP/Not>
Selects the filter mode of the left filter. You can choose between
following types of filters:
Low Pass, High Pass, Band Pass and Notch.
Hello999 OOOFilt PerfOO1
MdeL LP MdeR HP Ed B123