40
XBASE 999 Operating Manual
Attack
<Attac>
<000-127>
Controls the attack intensity of the Clap/Rim/Crash/Ride envelope.
High values may be used for instance to slowly fade in a reversely
played sample.
Hello999 OOOClap PerfOO1
Tune 050 Attac000 Ed B123
» Note
: You have to make
Peak Time
also greater than 0 when
Attack
is
greater than 0. Otherwise the envelope will not reach the highest peak
before the decay sets in, resulting in a weak signal.
Decay
<Decay>
<000-127>
Controls the length of the decay phase.
Hello999 OOOClap PerfOO1
Decay050PeakT000 Ed B123
Peaktime
<PeakT>
<000-127>
Controls how long the Clap/Rim/Crash/Ride envelope remains open
before starting the decaying phase.
Hiermit bestimmen Sie, wie lang die Clap Hüllkurve offen bleibt,
bevor die Decay Phase beginnt.
Hello999 OOOClap PerfOO1
Decay050PeakT009 Ed B123
» Note
: When the
Peak Time
value is high, you can hear the changes in
attack level very clearly. A change of decay time is then only recognizeable
very little because the sample may be played back already when decay
phase sets in. This is also dependend on the playback speed (
Tune
).
