Jolimark TP860 Series, Руководство пользователя

Страница: 78 / 109

TP860 User's Manual
- 72 -
0 ≤ n ≤ 255
When the last bit of n is 0, turn off the quadruple-size mode.
When the last bit of n is 1, turn on the quadruple-size mode.
FS p n m Print NV bit image
Format: ASCII: FS p n m
Decimal: 28 112 n m
Hex: 1C 70 n m
Description:
1
≤ n ≤ 64 m=0, 1, 2, 3, 48, 49, 50, 51 Prints the NV bit image according to the mode specified by m.
m= 0, 48 Normal printing; m=1, 49 Double width printing;
m= 2, 50 Double height printing; m=3, 51 Quadruple-size printing.
FS q n Define the NV bit image
Format: ASCII: FS q n [xL xH yL yH d1 d2 …dk] 1… [xL xH yL yH d1 d2 …dk
Decimal: 28 113 n [xL xH yL yH d1 d2 …dk] 1… [xL xH yL yH d1 d2 …dk]
Hex: 1C 70 n [xL xH yL yH d1 d2 …dk] 1… [xL xH yL yH d1 d2 …dk]
Description:
1
≤ n ≤ 64; xH=0; 0 ≤ xL ≤ 72; yH=0; 0 ≤ yL ≤ 30
k= (xL+xH*256)*(yL+yH*256)*8
The command can define 64 bit images at the same time. All NV images preciously defined are canceled
when new bit images are defined. After executing this command, ERROR LED will be on for a period of
time, then the PAPER OUT LED and ERROR LED will be both on and the printer restarts. No other data or
commands follow this command, or it may cause data lost or messy code. The NV image data will be stored
in the printer even when printer is powered off, and will not lose till the image is redefined. In order not to
damage the printer, the command should not be defined more than 10 times per day. The whole command
including the bit image data should be less than 128K bytes (1M bits).
xL,xH specifies number of bytes in the horizontal direction for the NV bit image and the limited width is 72
bytes and 576 dots.
yL,yH specifies number of bytes in the vertical direction for the NV bit image with the height of 30 bytes and
240 dots..
d specifies the data for the NV bit image(column format).
GS BEL n1 n2 Beep for appointment
Format: ASCII: GS BEL n1 n2 n3
Decimal: 29 7 n1 n2 n3
Hex: 1D 07 n1 n2 n3
Description:
N1 specifies the beeping times, n2 specifies the length of beeping time and n3 specifies the length of
intermission time. The unit of n1, n2 is 0.1 second.
GS ！ Select Character size
Format: ASCII: GS ！ n
Decimal: 29 33 n
Hex: 1D 21 n
Description:
n=0~7, 16~23, 32~39, 48~55, 64~71, 80~87, 96~103,112~119;
The high four bits of n represent the enlarged multiple of the character width and the low four bits represent
the enlarged multiple of the character height.