Jole float 4WD flex, Инструкция по эксплуатации

Страница: 11 / 27

Use Canopy
To open the canopy, pull canopy toward front.
To fold the canopy, pull canopy toward back.
Switch Handle Direction
!
Make sure child’s hands and legs are clear from the armrest
when switching the handle.
!
Front swiveling wheels or rear swiveling wheels can be locked
automatically when you use the handle in rear facing position
or front facing position.
Use Front Swivel Lock
Press the front swivel locks to maintain the moving direction.
It is recommended to use swivel lock on uneven
surfaces.
!
After switching the handle position, push the stroller forward
to ensure that the wheels nearest to you are locked and do
not swivel.
Use Brake
To lock wheels, step on the brake lever. Front wheel is shown
as , rear wheel is shown as .
Lift the brake lever to release wheel.
The brake must be engaged when placing and
removing children.
Always apply brake when stroller is in stopped position.
To ensure brake is fully on, gently rock the stroller
backwards and forwards before releasing the handle.
!
WARNING To prevent potential hazard, always make sure the
parking device for all swiveling wheels are engaged when you
reverse the handle.
Fold Stroller
Please fold the canopy before folding the stroller.
Push secondary lock and squeeze one-hand-fold button
Push the stroller forward to fold.
A click sound means the stroller is folded completely.
Use Accessory
Accessories may be sold separately or may not be available
depending on region.
Use Shoulder Harness Cover
The shoulder harness cover can be removed from the webbing.
Simply reverse these steps to re-assemble shoulder harness
cover.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it through
the shoulder harness slot from back to front. Rethread it
through the slot that is closest to child's shoulder height.
Use slide adjuster to change the harness length.
Adjust Calf Support
To raise calf support, push the calf support from position 1 to
position 2
To lower calf support, press the adjustment buttons on both
sides of the calf support , and rotate the calf support
downwards.
- 1
16
- 1
18
- 2
18
- 1
24
- 2
24
23
24
- 1
25
26
- 2
25
Press the button , while pulling the waist harness to proper
length.
- 2
16
- 3
16
14
There are two recline angles, 1-2 for adjustment.
17
15
-
see images
17
17
18
-
see images
21 23
-
see images
25
26
see images
19
19
19
see images
see images
20
21 22
19
Tip
Tip
Tip
Tip
STROLLER OPER
A
TION
STROLLER OPERATION