22
21
REAR F
ACING
INST
ALLA
TION
FORW
ARD F
ACING
INST
ALLA
TION
REAR F
ACING
INST
ALLA
TION
FORW
ARD F
ACING
INST
ALLA
TION
Top Tether -
Features
This child restraint has a tether strap permanently attached to the back of the seat.
Always use this tether strap.
Connect the tether strap to the built-in anchorage fitting in the vehicle, or if there is
not one available, install the anchor fitting supplied with this restraint by following the
instructions at the end of this section.
Top Tether Strap
Top Tether Snap
Hook
Tether
Anchorage
Tether Adjustor
Top Tether End
Storage Bag
Tether Adjustor
- faces inward when restraint
is rear facing
FORWARD FACING
REARWARD FACING
Top Tether
Snap Hook
Tether
Anchorage
The anchor fitting must be aligned as
shown unless stated otherwise in the
vehicle owners handbook.
If drilling a new hole, select a position on
the centre line of the seating position,
and no closer than 100 mm from the front
edge of the parcel shelf.
Tether Anchorage Installation
Most cars have several threaded holes to
fit the tether anchorage to.
Refer to the vehicle owners handbook
for information on the location of these
points.
Using the bolt provided attach the anchor
fitting to the mounting point behind where
the child restraint is to be installed.
See more detailed information on the next
page.
The threaded hole for the
anchorage bolt may have a
plastic cover over it
centre-line of
seating position
100 mm
