10
9
REAR F
ACING
INST
ALLA
TION
REAR F
ACING
INST
ALLA
TION
Installation
Place the restraint on the vehicle seat rear
facing.
See page 5 for recommended positions in
the vehicle.
1. Pull the vehicle lap/sash belt out and
pass through the slot in the restraint.
Pass the vehicle belts over the restraint
seating surface and out the other side.
2. Engage the vehicle belt buckle.
Lap
Belt
Sash Belt
REARWARD FACING
BELT PATH
Look for this label showing the cor-
rect path for the vehicle belts
“CLICK”
REARWARD
FACING BELT
PATH
2
IMPORTANT: the vehicle belts
must be fully down in the slots in
the side wings
1
5. Connect the top tether strap.
4
3
Installation
3. Pull the vehicle belts tight.
4. Ensure there are no twists in the belts.
5
NOTE: many vehicles have built-in top
tether connection points.
If your vehicle does not have these re-
fer to page 22 for information on fitting
the anchorage supplied.
