REAR F
ACING
USE
Securing a Child in the Restraint
- Adjusting the Harness
8.
Tighten harness by pulling on the ad
-
juster strap at the front of the r
estraint.
Shoulder straps should be a snug fit.
Note: sometimes the straps may be loose
in the lap part of the harness.
You may need to pull loose straps thr
ough
the buckle tongues upward towar
ds the
child’s shoulder and then pull again on the
adjuster strap.
This may need to be repeated several
times to get a snug fit.
9.
Correct strap tension.
Put a finger under each strap and pull
gently outwards.
There should be no gap between your
finger and the baby.
8
Pull strap at
front to tighten
shoulder straps
9
NO
GAP
Put finger under strap
and pull out
GAP
Put finger under strap and
pull out
14
REAR F
ACING
USE
IMPORTANT
The buckle tongue pushed in last
should “CLICK” when it locks into
place. If it does not click, try again or
try cleaning the buckle.
Securing a Child in the Restraint
- Using the Har
ness
5.
Place buckle tongues into the
quick release buckle.
7.
Recheck shoulder strap height.
6.
Make sure ther
e are no twists in the
straps.
5
7
6
WARNING
DO NOT LEAVE CHILDREN
UNATTENDED IN THE CAR
13
“CLICK”
