background image

Surface Technology

Oberflächentechnik

i

!

1

2

4

List of contents

 System 

overview 

  Page 

02

List of contents   

 

Page 04

Hinweise zur Anleitung 

 

Page 04

Safety instructions 

 

Page 04

Warranty/Identifi cation 

 

Page 05

Device overview   

 

Page 06

Technical data   

 

Page 07

Operation/Use/ Care 

 

Page 08

8 Troubleshooting 

  Page 

14

Telefax form 

 

 

Page 15

Tips on using the manual

Congratulation on the purchase of this device. 

This manual has been written for the device user to ensure a problem-free operation, care and 

maintenance.

Important instructions and information concerning safety and operational reliability have been 

highlighted. 

The symbols used in the manual have the following meanings:

Working and operating processes which must be observed to the letter to exclude any risk to 

persons.

The illustrations and diagrams are numbered in sequence within each chap¬ter. Some of these 

illustrations have keys. References to illustrations within the text e. g. (5.1/2) have the following 

meaning: 

 

5.1 

Figure 5.1

 

2  

Position 2 in the key to the fi gure.

Please feel free to call our customer service department at any time should you encoun-ter tech-

nical problems which are not dealt with in this manual:

Telephone 

+49 (0) 22 04 / 8 39 - 0

Telefax   

+49 (0)  22 04 / 8 39 – 60

Internet  

www.joke.de

Working and operating processes which must be observed to the letter to avoid any damage to 

the device.

Technical information to which the device operator must give special attention.

Содержание 0007500



















Отзывы: