77
7
1
2
3 4 5
1
1
7
1 - Motor socket of the control unit
2 - On/off switch
3 - Speed selector
4 - Rotation direction reversing switch
5 - Green indicator light
Fig. 7.1 Control unit front view
Fig. 7.2 Control unit side view
1 - Charging socket for the power supply unit
5.
The corresponding motor handpiece is connected to the control unit motor socket on
the front of the device. The connector locks automatically.
IMPORTANT: the red dot on the connector must line up with the red dot on the socket!
Simply pull the handpiece out of the socket to release.
6.
The handpieces are screwed on to the motor (7.3.). Be sure to pay attention to the cor-
rect motor connection confi guration: ENEKSKA 3 = (-) and ENESKA 4 = (+).
Only exert moderate force when screwing on the handpiece. Rotate the carrier axle on
the collet if necessary until the connection engages.
The max. speed must not exceed 40,000 rpm.
Fig. 7.3 Changing the tool for the handpiece
