66
6
6
i
• brushless direct-current (DC) motor
• modern high-output 14.8 V lithium ion storage battery without memory eff ect
• clockwise/anticlockwise running
• charging and ready indicator
• digital control with safety cutoff
• high torque with max. 7.8 N/cm at the motor shaft
• ENESKA 3 and 4 motor connection - for screw-fi tting all handpieces
of the ENESKA 3 and 4 series
Set consisting of:
1 x motor with motor cable
1 x control unit with storage battery
1 x charger
Handpieces and storage case (order no. 0 006 851) not included in scope of delivery!
7
6
Technical data
ENESKA mobile 3 and ENESKA mobile 4 cordless grinder
Speed
1000 - 40,000 rpm
Period of use
up to 10 hours
Charging time
120 minutes
First start-up
1.
Stand the control unit at a suitable safe, dry place. The ambient temperature should be
between 0° and +40° C and relative humidity should be between 10 and 85 %.
2.
Once the control unit has been fully charged, remove the charger. Connect the motor to
the control unit (5.1.7).
3.
The device must be switched on at the on/off switch (5.1.2). The green indicator light
(5.1.5) illuminates.
4.
The direction of rotation of the motor handpiece is changed by operating the rotation
direction reversing switch (5.1.4).
The max. speed in the clockwise or anticlockwise direction is always 40,000 rpm.
