All Copyright and rights are the property of Johnston Sweepers Ltd
V Range 501
l
651
l
801 Maintenance Manual
MA7:4
Chapter - Remove and Refit Procedures
Page Issue A
Raising the body.
If it is necessary to raise the body, and neither the
standard or the emergency methods can be used,
then two holes are provided in the front of the body.
1. Remove blanking bolts (
A
).
2. Insert suitable eye bolts item (
B
) into the M16
socket.
Removing the body.
If it is necessary to remove the body use the two
lifting eyes (
B
) together with a suitable chain at
point (
C
). Care should be taken to ensure that the
weight is evenly distributed so that the body lifts
squarely
M02MA-037
B
D
E
F
M02MA-002
A
B
C
Channel Brush Cylinder
Removal and refitting
1.
Disconnect the two hydraulic hoses from
rear of the cylinder.
2.
Remove cylinder pin (
B
).
3.
Remove stop from pivot frame (
D
).
4.
Remove cylinder eye pivot (
E
) from pivot
head lever (
F
). Lift out cylinder.
5.
Refitting is the reverse of removal, grease
items (
B
) and (
E
) prior to refitting.
Body Lifting or Removal
