RT655 Operator’s Guide
OG4:4
Chapter - Optional Equipment
Page Issue A
PREPARATION
Before using the Wanderhose it is necessary to blank off
the intake hood ducting to prevent air passing into the
body via the hood. The duct has to be manually blanked
using the blanking plate. This plate (A) is stowed on the
underside of the body adjacent to the intake duct and
must be positioned on the seat at the top of the flexible
nozzle duct (B). The body must be raised slightly to
position the plate, and lowered afterwards.
RTOG. 030
RTOG. 040
WANDERHOSE OPTION
OPERATION
- Once the intake duct(s) have been blanked:
1.
Before using the Wanderhose, always fully open the VEG gate.
2.
Raise the body and blank off suction duct
3.
Switch the ECO override button, so full throttle RPM is available
4.
Unclip the Wanderhose end from the option frame stowage
5.
Clip on extension hose
6.
Set engine RPM as required
7.
Use powaboom controls to release Boom from Stowage and manoeuvre
Sharp objects warning - there can be a risk of injury from sharp objects such
as discarded hypodermic needles becoming lodged in the sweeping system.
The use of ‘needle stick gloves’ is recommended when changing brushes,
using the Wanderhose/Littasnatch and when cleaning out the machine.
Safety Notice
Ear defenders are recommended when working around the machine
Eye protection is recommended when working around the machine
