OG3:3
RT655 Operator’s Guide
Johnston Sweepers Limited
Chapter - Operation
Page Issue A
ENGINE STARTING AND OPERATION PROCEDURES - JOHN DEERE
Before driving the sweeper, it is advisable to have the chassis engine running as it is necessary to
ensure there is adequate air pressure to raise the sweepgear from the ground.
Ensure sweepgear switches are turned off.
NB :
The chassis ignition switch must be turned on to energise the switch panel. Never engage
engine cranking for longer than 60 seconds as this can damage the starter motor.
John Deere Electronic Engine
Starting Hot or Cold
Press the ignition switch (W) to its on position, it will illuminate.
(V) will illuminate to show engine preheating is active. When light goes out press crank button (X)
release when engine fires.
(X) is the throttle and will increase engine RPM to 1500 before needing ECO mode override button
(Q) to 2000 RPM.
RTOG.047
Src:Eng
SPN00000
V
W
Y
X
