4
daintree
curved shower screen
INSTALLATION GUIDE
JohnsonSuisse
9
9
12
12
6
5
9
12
12
9
5
3
3
6
3
3
3
3
5
6
1
3
2
4
Insert fixed panel end block(12)first then short fixed panel
seal(9)into slot on both bottom and top rails(5)(6). (Usually
comes preinstalled in top and bottom rail.)
Note:Pre-assembly of screen is required. Make sure this is
done in a clean and litter free space so screen does not get
damaged
Push fixed panels(3) into seal that is located in the top rail(5).
Make sure that the panel is firmly up against the fixed panel
block(12)and fully inserted into the short seals(9). Hint-Wet
the edge of glass and seal to make it easier to insert panel.
Push fixed panels(3) into seal that is located in the
bottom rail(6).Make sure that the panel is firmly up
against the fixed panel block(12)and fully inserted into
the short seals(9). Hint-Wet the edge of glass &seal to
make it easier to insert panel.
Screw the fixed panel extrusion(2) to the top and bottom
rals. Please make sure that the location of the screw holes
in the fixed panel extrusion line up with the holes in the top
and bottom rails.
