background image

2

daintree 

curved shower screen

   

    

IMPORTANT INFORMATION

 

JohnsonSuisse

Please inspect the product immediately upon receipt for transit damage, missing packs/parts or manufacturing faults. 
Damage reported later cannot be accepted. Please handle the product with care avoiding knocks and shock loading to 
all sides and edges of glass. 

Damaged glass or missing parts will not be replaced 

under warranty if the installation process has begun.

NOTE: SAFETY GLASS CANNOT BE REWORKED

Please read these instructions carefully before you start installation. Special care should be taken when drilling walls to 
avoid hidden pipes or electrical cables.

Securing into a stud or timber brace is highly recommended, if unable to do so, other secure means of 
fixing must then be considered.

AFTER CARE INSTRUCTIONS

This shower screen has been treated with EnduroShield® easy-to-clean glass surface treatment. Please follow the care 

instructions affixed to the door panel to ensure that your treatment is long lasting.

After use, your shower should be cleaned with soap and water. This is particularly important in hard water districts where 
insoluble lime salts may be deposited and allowed to build up. Cleaners of a gritty nature should not be used. Care should 
be taken to avoid contact with strong chemicals such as organic solvents and strippers. Glass cleaners can be used but 
with caution. If in doubt please contact the manufacturer of the cleaner in question.
Please keep these instructions for aftercare and customer service details.

TOOLS REQUIRED

This product is heavy and awkward to 
handle and two person installation is 
recommended.

Содержание daintree curved shower screen









Отзывы: