17
I2
5
I2
4
I2
3
I2
2
I2
1
I2
0
I1
9
I1
8
I1
7
I1
6
I1
5
I1
4
I1
3
tr
p
t
p
l
n
o
n
l
jp
it
fr
fi
e
n
d
e
c
z
Cleaning the float housing(Tub overflow protection)
If the suction performance is inadequate, replace the dust bag and service
the filter as described below:
The full double-filter paper sack must be disposed of according to national
regulations.
Service, maintenance and care
The maintenance of the machine is the pre-condition for trouble-free running
and a long life.
Service intervals
TASKI machines are built to the highest quality standards. This is supported by
internationally recognised quality control procedures. Electrical and mechanical
parts are subject to wear or aging if used for long periods of time.
Service centre
Should you contact us due to a malfunction or for placing an order, please
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the
address of your nearest TASKI partner can be found on the last page of this
manual.
• Unscrew the float fastener, and remove the float
housing.
• Turn the float housing upright and unscrew the
wing nut inside.
Now you can take off the plastic holder and
sponge filter.
• Clean each part thoroughly with water.
Let the parts dry out completely before assembling.
• Check that the float is not damaged.
• Re-assemble the top part of the float housing
and tighten the wing nut.
• Re-assemble the two parts as shown.
Use the notches for correct coupling (arrow).
• Re-tighten the float fastner.
• Check:
-that the float easily moves up and down.
- that the float covers the suction air inlet completely.
If necessary, wait a moment before removing the double-filter
paper sack, in order to let the dust settle.
• Remove the double-filter paper sack from the connector and dispose of it.
• Place the empty double-filter sack over the hose support.
T
he rubber flange of the double-fliter paper sack
must
be behind the ridge
of the hose support!
Lightly soiled cloth filter.
• Brush off or using another vacuum cleaner, suck off the dirt.
Heavily soiled cloth filter.
• Wash the cloth filter in the washing machine (max. 30°C/86°F).
• Place the damp cloth filter on the basket and allow it to dry in the air.
The cloth filter may not be put in the tumble drier!
Caution:
The machine may only be operated with a dry and functional filter
cloth!
• Insert the filter basket.
The arrow must point towards the hose support.
Heavy soiling of the filter disc
• Turn the vacuum lid round, and replace the filter
disc with a new one.
The blue side of the filter disc must be visible.
Caution:
The machine may only be operated with the filter disc fitted!
• Place the ridge of the suction top into the catch
as shown, then press down until you hear the
fastener catch click into place.
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
◊
= after use,
◊◊
= every week
Activity
◊
◊◊
page
Check double-filter paper sack, replace if necessary
Cleaning/replacing the filter cloth
17
Checking/replacing the filter disc
17
Clean the float (indication for full recovery tank), ensure
that the float is not stuck and can easily move up and down.
17
Clean the machine with a damp cloth
16
• In order to maintain operational reliability and availability for use, the service
must be carried out after 500 working hours or at least once a year.
S
horter intervals may be necessary
u
nder rough or extreme working
conditions and/or in case of insufficient maintenance.
1
2
