Johnson tomit, Инструкция по эксплуатации

Страница: 24 / 28

24
Components
A. Appliance casing with motor
B. Rolling screw
D. Speed I - II selector key
E. ON-OFF-R selector key
F. T tube release key
G. T tube
H. Food insertion basin
L. Food press
M. Metal rotor
N. Star blade
P. Chopping discs (three different types)
Q. Ring nut
R. Plastic discs for sausages/salami and
dumplings
S. Accessory for dumplings
(for already minced food)
T. Accessory for sausages
(for already minced food)
U. Filtering cone for sauce
V. Peel ejector hole
Z. Plastic rotor
Y. Sauce conveyor
K. Conveyor strap
W. Strap stoppage
Preliminary operations on first use With
the plug disconnected from the electri-
cal socket, place the casing of the ap-
pliance (A) on a stable and dry surface
not near tanks or containers of liquids,
then proceed to assemble the appliance.
Caution when handling the blade as it is
very sharp.
Keep the key pressed (F) and insert the
tube (G) in hour 2 position in the front
hole on the casing (A), turning it anti-
clockwise, then release key F.
Position the basin (H) by inserting it in
the upper part of the tube (G)
Insert the metal rotor in the front hole
of the tube (G) (the plastic toothed part
should be facing the appliance), add the
blade (N) (assembled with the hollowed
parts facing outwards and the smooth
side inward), one of the discs (P) (ensu-
ring the teeth on the disc correspond
to the notches on the tube G) and lock
everything in place by screwing them in,
without forcing the ring nut (Q).
The choice of discs (P) is based on the
dimension of the desired chopping.
Place a container under the outlet of the
chopped food. Check the key (E) is in the
OFF position and place the plug in a sui-
table socket. Press the key (E) on the ON
position to activate the appliance. Leave
to work empty for approximately 2 mi-
nutes.
To remove any residual metal dust due
to manufacturing from the blade, discs
and rotor, insert some meat in the ba-
sin (H) which on passing will remove the
problem. Naturally this small quantity of
meat should be binned. Switch off the
appliance and bring the selector (E) to
position 0. Disconnect the plug from the
socket. Proceed with dismantling.
All the parts of the appliance (B-G-H-L-
M-N-P-R-S-T-U-Z-Y), with the exception of
casing A, should be washed with deter-
gent, rinsed and dried.
Assembly of the appliance
in different configurations:
Tomato squeezer (fig.1
)
Meat mincing (fig. 2)
Create dumplings using already
minced food (fig. 3) Stuff sausages
using already minced food ( fig. 4)
To make tomato sauce
(assemble the appliance as in Fig. 1).
Check the key (E) is in the OFF position
and the plug is disconnected from the
socket. Keep the key pressed (F) and in-
sert the tube (G) in the hour 2 position
in the front hole of the casing (A), tur-
ning it anti-clockwise, then release key
F. Position the basin (H) inserting it in
the upper part of the tube (G).
Insert the plastic rotor (Z) in the front
hole on the tube (G) (the toothed part
facing the appliance), add
the filtering cone (U) (ensuring the te-
eth correspond to the notches on the
tube G) and block everything in place by
screwing them in, without forcing the
ring nut (Q).
Position the conveyor slide so the end