Johnson T7000 PRO Скачать руководство пользователя страница 3

This Owner’s Manual describes the functions of the following product:
Treadmills T7000 PRO

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.

INSTRUCTION

03

02

T R E A D M I L L   T 7 0 0 0   P R O

See "Product Specifications" (Page 28) in this manual for product specific features, the 

T7000 PRO

 is intended for commercial use.

It is recommended that all users of fitness exercise equipment should be informed of 
the following information prior to its use.

When using the 

T7000 PRO

, always follow basic precautions:

• 

To ensure your safety and to protect the unit, read all the instructions before assembling

   and using the treadmill.

• 

To ensure the proper use and safety of the treadmill, make sure that all users read

   this manual. Please make this manual a part of your facility’s training program.
   Remind the users that before undertaking any fitness programme, they should obtain
   complete physical examinations from their physicians. If, at any time while exercising,
   the user experiences dizziness, pain, or shortness of breath, nausea or feels faint he
   or she must stop immediately.

READ AND SAVE ALL INSTRUCTIONS 

before assembling or using this treadmill. 

It is strongly recommended to take the following safety instructions.

• DANGER: 

To reduce the risk of electrical shock, always unplug the treadmill before cleaning

    or attempting any maintenance activity.

• WARNING: 

To reduce the risk of burns, fire, electric shock, or injury, it is imperative to

    connect each product to a properly grounded electrical outlet.

• 

CAUTION: 

If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising

    immediately and consult your physician before continuing.

• 

Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not working

    properly, or if it has been damaged or immersed in water. Return the treadmill to the 
    authorized Johnson dealers for examination and repair.

• 

Keep the power cord away from heated surfaces. Do not pull the equipment by the power

    cord or use the cord as a handle. Never place the power cord under carpeting or place any
    object on top of the power cord.

• 

Only use the power cord provided with your treadmill. If the power cord is damaged,

    it must be replaced by the manufacturer, an authorized service agent, or a similarly qualified
    person to avoid a hazard.

• To disconnect, turn the switch to the off position, then remove the plug from the outlet.
• 

Use this treadmill for its intended purpose as described in this manual. Do not use attachments

    that have not been recommended by the manufacturer.

• 

Never drop or insert any object into any opening in the product. If an object should drop

    inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If
    the item cannot be reached, contact the authorized Johnson dealers.

• 

Do not reach into or underneath the unit, or tip it on its side during operation. And, keep

    hands and feet clear at all times from moving parts to avoid injury. 

IMPORTANT SAFETY INSTRUCTIONS

T R E A D M I L L   T 7 0 0 0   P R O

Содержание T7000 PRO

















Отзывы: