Johnson J10RLSUR, Руководство по обслуживанию

Страница: 53 / 229

MAINTENANCE
INSPECTION AND MAINTENANCE SCHEDULE
51
3
Fuel system components, inspect and repair leaks
(2)
3 3
Fastener inspection, tighten loosened components
3 3
Engine to transom mounting hardware, re-torque
3 3
Cam follower, inspect and lubricate
3 3
Thermostat, inspect and check operation
3 3
Spark advance linkage, lubricate
3 3
Electric starter, lubricate
3 3
Electrical and ignition wires and connections, inspect
3 3
Gearcase lubricant replace B
3 3
Powerhead synchronization and linkage, inspect
(2)
D
3 3
Gearcase lubricant, inspect fill level and condition of lube B
3
Starter pinion shaft, inspect and lubricate
(3)
F
3
Propeller shaft splines, inspect and lubricate D
3
Spark plugs, replace
(2)
3
Decarbonize G
3
Driveshaft splines, inspect and lubricate E
3
Water pump, inspect and replace
3
(1) Also recommended at 10-Hour Inspection
(2) Emission-related component
(3) Do not use light duty penetrating lubricants
A Evinrude/Johnson Anti-Corrosion Spray or Evinrude/Johnson “6 in 1” Multi-Purpose Lubricant
B HPF XR Gearcase Lubricant
C Power Trim/Tilt and Power Steering Fluid
D Triple-Guard grease
E Evinrude/Johnson Molylube P/N 175356
F Starter Bendix Lube Only P/N 337016
G Evinrude/Johnson Engine Tuner
Engine Maintenance and Inspection Schedule
Description
Engine
Care
Product
Frequency
Each Use 10-Hour Inspection Every 50 Hours or 6
mon
ths
Every 100 Hours or An
nually
Every 200 Hours or Bian
nually