Johnson J10RLSUR, Руководство по обслуживанию

Страница: 52 / 229

50
MAINTENANCE
INSPECTION AND MAINTENANCE SCHEDULE
INSPECTION AND MAINTENANCE SCHEDULE
Routine inspection and maintenance is necessary for all mechanized products. Periodic maintenance
contributes to the product’s life span. The following chart provides guidelines for outboard inspection and
maintenance to be performed by an authorized Dealer.
IMPORTANT:
Outboards used for rental operations, commercial applications, or other high hour use
applications require more frequent inspections and maintenance. Inspection and maintenance should be
adjusted according to operating conditions and use; and environmental conditions.
Engine Maintenance and Inspection Schedule
Description
Engine
Care
Product
Frequency
Each Use 10-Hour Inspection Every 5
0
Hours
o
r 6 m
ont
hs
Every 1
00 Hours
or
An
nu
ally
Every 2
00 Hours
or
Bian
nu
ally
Clamp screws, lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Tilt/run lever shaft / tilt shaft, lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Swivel bracket / tilt support bracket,
lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Shift lever shaft and detent / shallow water drive bracket, inspect
and lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Engine cover latch, lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Throttle and shift linkage, lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Choke, carburetor linkage / starter lockout, inspect and lubricate
(1)
D Every 60 days / Every 30 in Saltwater
Fish line trap, inspect Every 60 days / Every 30 in Saltwater
Anticorrosion anodes, check operation
3 3
Water intake screens, check condition
3 3
Overboard water pump indicator, check operation
3 3
Steering friction, check operation
3 3
Steering system, check operation
3 3
Throttle and shift operation, check function
3 3
Emergency stop circuit and lanyard, check function
3 3
Flush cooling system
3
Emergency start cord, onboard and inspect
3
Operator’s Guide, onboard
3
Clamp screws, tighten
3
Engine upper and lower motor covers, clean and wax
3
Operator’s Guide, review
3
Fuel filter inspection, eliminate contamination
3