manualshive.com logo in svg

Johnson DM3474, Руководство по обслуживанию

Поделиться
Скачать
Johnson DM3474 Скачать руководство пользователя страница 3

HIGH SPECIFICATION DATA TRANSCEIVER

PART NO. 242-3474-XX0

Copyright

 1998 by the Johnson Data Telemetry Corporation.

The Johnson Data Telemetry Corporation designs and manufactures radios and radio modems to serve a wide variety of data 
communication needs.  The Johnson Data Telemetry Corporation produces equipment for the fixed data market including 
SCADA systems for utilities, petrochemical, waste and fresh water management markets and RF boards for OEM applications 
in the Radio Frequency Data Capture market. 

DATA TELEMETRY PRODUCT WARRANTY

The manufacturer's warranty statement for this product is available from your product supplier or from the Johnson Data 
Telemetry Corporation, 299 Johnson Avenue, Box 1733, Waseca, MN 56093-0833. Phone (507) 835-8819.

WARNING

This device complies with Part 15 of the FCC rules.  Operation is subject to the condition that this device does not cause 
harmful interference.  In addition, changes or modification to this equipment not expressly approved by Johnson Data 
Telemetry Corporation could void the user's authority to operate this equipment (FCC rules, 47CFR Part 15.19).

DO NOT allow the antenna to come close to or touch, the eyes, face, or any exposed body parts while the radio is transmitting.

DO NOT operate the radio near electrical blasting caps or in an explosive atmosphere.

DO NOT operate the radio unless all the radio frequency connectors are secure and any open connectors are properly 
terminated.

DO NOT allow children to operate transmitter equipped radio equipment.

SAFETY INFORMATION

Proper operation of this radio will result in user exposure below the Occupational Safety and Health Act and Federal 
Communication Commission limits.

The information in this document is subject to change without notice.

                                                   is a trademark of the Johnson Data Telemetry Corporation.

Содержание DM3474

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды