Johnson Combi, Инструкция по эксплуатации

Страница: 16 / 20

16
COMPONENTS
A. Beater
B. Button for whip release
C. Speed selector
D.“Turbo” effect push-button
E/F. Housings for the whips
G. Hole to place beater A on the support R
H. Whips to mix and whip no thick sub-
stance
L. Hook whips to mix relatively thick sub-
stances
N. Wings for connection
O. Bowl
Q. Base
R. Support with joint for the beater
S. Pivot for beater positioning
U. Release button to rotate the support
INSTRUCTIONS FOR USE
- Choose the type of whip suitable to the
processing foreseen (mix, whip).
For dough of sweets we suggest to use the
hook type whips L.
- The whips must be used in pairs. Insert
the stem of the whips in the housings e
and f of the beater. Match the wings N
with the inside notches then press until
you activate the blocking.
- Place the base Q on a flat and stable sur-
face. Place the beater A on the support R
of the base in such a way that its hole G
matches with the pivot S, then press lightly
downwards blocking it.
- Press the button U and lift the beater
rotating the support R, place the bowl O
with the substances to be treated (do not
exceed with the quantity. The whips must
not be completely immersed).
- Whit the selector C in position 0, insert
the plug in a suitable electric socket (avoid
the use of extensions).
- Lower the beater dipping the whips. Ac-
tivate the appliance selecting on C the
speed to use. Alternate operation periods
with sufficient rests avoiding long opera-
tion time that would overheat the applian-
ce and damage it.
- If the processing requests it you can in-
crease, temporarily, the speed by pressing
the button D for “turbo” effect.
- When you have finished, or when you
want to work in other bowls, bring the se-
lector C on position 0 and remove the plug
from the socket.
- To remove the whips from the beater
press the release push-button B.
ATTENTION
The maximum content must not exceed
the capacity of 1,5lt, otherwise the ingre-
dients in the bowl must stay about 4 cm
from the edge.
The appliance is equipped with a special
mechanism that during the processing
induces a rotary movement with regular
speed to the bowl O. In case you want to
add more ingredients to the mixture or
change the type of whips, you must turn
off the appliance by turning the selector to
speed C on “0” and raise the motor body.
If there are space problems or if you want
to work in different containers, you can
use the motor body A also separated from
the support R
CLEANING
Any cleaning operation should be done
with the plug disconnected from the elec-
tric network.
- The beater A can be cleaned only with a
damp cloth.
- The remaining components can be wa-
shed in tepid water with a small quantity
of detergent and accurately rinsed.
Before storing the appliance make sure
that all the components are dry.
Manuale Sbattitore.indd 16 12/04/19 17:01