Johnson Aria Pura, Инструкция по эксплуатации

Страница: 26 / 32

26
on the control panel), an acoustic signal
will be emitted and 2 dashes will appear
on the display to indicate that the setting
has been made. .
Note:
The ON / OFF button (M or R) does not
completely disconnect the power supply
of this product. To turn off the device
completely, disconnect the power cord
plug from the power outlet.
OSCILLATION
(from remote control or control panel)
Press the SWING button (P or Z) to activa­
te the oscillation of the device, press the
SWING button (P or Z) again to stop the
oscillation of the device.
TIMER
(from remote control or control panel)
Press the TIMER / IONS button (N or V), the
“clock” icon (N1) will appear on the display
(C)
to confirm the setting.
To program the automatic shutdown of
the device at the end of the selected time,
which can vary from 1 to 15 hours, always
press the key (N or V) in succession.
Each press will increase the time by 1 hour.
IONIZING SYSTEM
(from remote control or control panel)
To activate the ionizing system, press the
button (T) on the remote control (H). To
confirm the setting, the relative icon (T1)
will appear on the display
To deactivate the ionizing system, press
the (T) button on the remote control (H)
again.
It is also possible to activate the ionizing
system from the control panel (C) by hol­
ding down the TIMER / ION (N) button for
about 3 seconds. The relative icon (T1) will
appear on the display (C)
to confirm the successful setting.
To deactivate the ionizing system, press
the TIMER button (N) again for about 3 se­
conds
SYSTEM INFORMATION
IONIZING
The air in homes and offices can quickly
“get dirty” due to external pollution, or
from smoke, bacteria, dust, pollen and al­
lergens which accumulate can also cause
respiratory problems.
An ionizing device can solve the problem
of air pollution in closed spaces and bring
health benefits.
Thanks to the negative ions released by
the ionizing system, the polluting parti­
cles are removed from the environment
and by falling on the surfaces you avoid
breathing them.
WIND (only from remote control)
By pressing the WIND button (U) on the re­
mote control (H) it is possible to choose
between 3 pre­set ventilation modes.
NORMAL: (no icon highlighted on the di­
splay (C) this setting does not change the
modes chosen by the user.
NATURE: the relative icon (U1)
appears on the display this setting simula­
tes a natural breeze, increasing and decre­
asing the flow of air as in nature.
SLEEP: the relative icon (U2)
appears on the display
this setting simulates a light breeze mode,
starting with a strong airflow, then gra­
dually reducing it to medium and then
low, before repeating the cycle.
“Suitable for the night”
USING THE REMOTE CONTROL
Insert a “CR2025 (3V) model cell battery
(a lithium battery is recommended for a
longer life) as shown in fig.
Remove the battery if the remote control it