Johnson Aria Pura, Инструкция по эксплуатации

Страница: 25 / 32

25
COMPONENTS
A. Arch structure / Air duct
B. Air outlet slots
C. LED display / Control panel
D. Filter cover grid with holes for air inlet
D1. Grille retaining hooks (D)
E. Support base
F. Luminaire body
H. Remote control
CONTROL PANEL
L. SPEED key (choice of fan speed)
M. ON / OFF button (on / off)
N. TIMER / ION button (time setting and
ionizing system)
P. SWING button
N1. Timer icon
T1. Ionizing system icon
U1. NATURE icon
U2. SLEEP icon
FILTERS
Q. HEPA H13 filter with ACTIVATED CAR­
BON filter
Q1. Mesh filter
REMOTE CONTROL
R. ON / OFF button (on / off)
S. SPEED button (fan speed selection)
T. IONIZING SYSTEM key (emission of ne­
gative ions)
U. WIND button (3 ventilation options set)
V. TIMER button (time setting)
Z. SWING button
Remove the appliance parts from the
package and dispose of the packaging
components according to the law. Check
that the product is intact and that all
components are present. In the event of
obvious anomalies or transport damage,
do not use the appliance, but contact the
retailer or an authorized service center.
INSTALLATION
Place the device on a flat, stable and non­
slip surface. Do not place the device on an
unstable surface (for example inclined or
soft) in order to avoid falls. Do not place in
areas with a high percentage of humidity.
Do not cover the outlet slots and the air
inlet holes while the appliance is opera­
ting. Place the appliance away from cur­
tains in order to prevent them accidentally
blocking the air inlet and outlet, preven­
ting the product from functioning pro­
perly.
In order to ensure proper air circulation,
make sure in any case to place the applian­
ce in free spaces and free from objects for
at least 1 meter radius.
Do not place anything on top of the ap­
pliance.
FUNCTIONING
Connect the plug of the power cord to the
power outlet
An acoustic signal will sound to indica­
te that the device has entered Stand­By
mode, and two horizontal dashes will ap­
pear on the display
START
(from remote control or control panel)
By subsequently pressing the ON / OFF
button (M or R) a double acoustic signal
will be emitted to indicate the start (always
at speed 1, low, with F 1 written on the
display)
By pressing the SPEED key (L or S) it is
possible to choose the desired ventilation
speed, each time the ventilation mode is
pressed it changes between the 3 possible
ones and the message F 2 (medium speed)
or F 3 (high speed) will appear on the di­
splay.
To reset the device in Stand­By mode,
press the ON / OFF button (M or R) (by
pressing on the remote control, by touch
1 meter