14
©2018 Johnson Level & Tool - Rev. 1
Note:
• If the laser beam moves beyond its 5° leveling allowance, the
laser level will emit an audible alert. Press and hold on the
remote control to bring the slope back within tolerance.
Deactivating the Remote Control
1. After powering on the unit, the remote control LED will illuminate,
indicating that the remote control is ready for use.
2. To deactivate the remote control, press on the laser level. The
remote control LED will turn off.
3. To reactivate the remote control, press again. The remote
control LED will illuminate.
Sleep Mode vs. Power Off
Turning off the laser will put it in to sleep mode for 30 minutes. While
in sleep mode, the laser will continue to receive signals from the
remote control, and can be woken up by using the remote control.
After 30 minutes in sleep mode without operation, the laser will
power off and no longer receive remote control signals.
1. After the laser level is powered on and it goes through the
self-leveling sequence, press on the remote control to enter
sleep mode. The laser beam and all lights on the laser level’s keypad
will initially turn off, after which time the power LED will blink.
2. If the unit is in sleep mode for 30 continuous minutes, the unit will
automatically power off.
3. To return to normal operation from sleep mode, press on the
remote control. The laser level will default to the most recently
used operating mode.
2810i-Color_Manuals 5/2/18 2:16 PM Page 14