14
©2012 Johnson Level & Tool
Note:
The battery symbol display on the remote shows the battery
strength of the remote batteries and not the laser battery strength.
The differences between the remote button and laser buttons are
as follows:
1. Holding the on the remote Level/Backlight for three seconds
will turn on the remote backlight. To turn off the backlight, hold
the same button in again for another three seconds.
2. One press of the
manual button will put the laser in “sleep”
mode. All the laser settings will be saved on the laser. The only
button that will work on the laser is the
power button. The
only buttons that will work on the remote is the
manual
button and
power button. Another press of the
manual
button will turn the laser back on to its original setting. This
“sleep” mode can be used to save on the battery life if the laser is
not going to be used for a period of time.
If the laser is not used after sixty minutes in “sleep” mode, the laser
will power off automatically and all stored information will be lost.
6274H-2_Manuals 9/26/12 11:32 AM Page 14
