©2012 Johnson Level & Tool
13
Using the Remote Control:
1. Install two “AA” batteries in the battery compartment following the
diagram inside the compartment.
2. With the laser turned on, turn on the remote by pressing the
power button.
3. The LCD on the remote will display the following
4. The laser and remote default into channel (CH1) 1. The remote
control will only work when the laser and remote are on the same
channel. If other lasers are in the area, the remote and laser can
be changed from CH1 to CH9 and CHA to CHF making it so the
remote will only work for a specific laser. To change the remote
channel, press the
remote button.
5. If the LCD on the laser displays
the remote is not turned on, is
too far away from the laser or is on a different channel.
6. If the LCD displays
on the laser and remote, the remote and
laser are on the same channel.
6274H-2_Manuals 9/26/12 11:32 AM Page 13
