25
English
6.2 S-TEK Single Tank Adapter (S.T.A.) for both PURE and PRO
Harnesses
For this procedure you will require the following three S-TEK components (fig. 11):
• S-TEK PURE or PRO Harness (Stainless
Steel or Aluminium) with included Ergo
Nuts (x2)
• S-TEK Wing (normally an S-TEK 30 Wing
or 40 Wing for use with an S.T.A.)
• S-TEK Single Tank Adapter (S.T.A.) with
included Mounting Bolts and Wing Nuts.
NOTE:
Remove the above items from their
packaging and remove the Low Pressure
Inflator Hose packaged with your S-TEK
30 Wing, 40 Wing or 60 Wing. Keep it to
one side, in order to assemble this onto
your First Stage regulator, outlined later in
this manual.
Step 1
Remove the 2 x Ergo Nuts from the
back plate (fig. 11-1) and discard the
triangular cardboard tabs (fig. 11-2).
Step 2
Using a small flat screwdriver, lever
the retaining tabs (fig. 11-3) on both
of the Ergo Nuts to remove the covers
(fig. 11-4).
Step 3
Remove the wingnuts from the
mounting bolts of the Single Tank
Adapter (fig. 11-5).
Step 4
Place the wingnuts from the Single
Tank Adapter into the disassembled
Ergo Nuts (fig. 11-6), replace the
snap-on covers onto the Ergo Nuts
and engage the tabs to ensure they
are secure.
fig. 11
fig. 11-1
fig. 11-2
fig. 11-3
fig. 11-4
Содержание Scubapro S-TEK
Страница 1: ...S TEK ...
Страница 37: ...37 English Note ...
Страница 38: ...38 ...
Страница 39: ...39 English ...
