Johnson Outdoors Humminbird Cannon Optimum, Руководство по аксессуарам

Страница: 23 / 38

23
Set Up Cannon on the Humminbird Control Head
Set the Line Weight
The default line weight is 50-150lbs, but it can be set to either 50-150lbs, 150-200lbs or 200+lbs.
SOLIX Series HELIX Series
1. From the Cannon Settings menu, select the Cannon you
want to adjust (Optimum 1, 2, 3 or 4).
2. Select Line Weight .
3. Tap, or press the ENTER key, to select your line weight.
4. Repeat these steps for each additional Cannon.
1. From the Bluetooth Cannon menu, select the Cannon tab
you want to adjust (1, 2, 3 or 4).
2. Select Line Weight .
3. Press the RIGHT or LEFT Cursor key to select your line
weight.
4. Repeat these steps for each additional Cannon.
4
|
Set the Up/Down Speed
The up speed and down speed are the speeds at which the spool spins while the weight is moving.
SOLIX Series HELIX Series
1. From the Cannon Settings menu, select the Cannon you
want to adjust (Optimum 1, 2, 3 or 4).
2. Select Up Speed or Down Speed .
3. Press and hold the slider, or press and hold the ENTER
key, to adjust the setting.
4. Repeat these steps for each additional Cannon.
1. From the Bluetooth Cannon menu, select the Cannon tab
you want to adjust (1, 2, 3 or 4).
2. Select Up Speed or Down Speed .
3. Press the RIGHT or LEFT Cursor key to adjust the setting.
4. Repeat these steps for each additional Cannon.
5
|
Set the PIC Value
The Positive Ion Control (PIC) system applies a charge between 0.2 to 1.2 volts on the downrigger line at all times. The correct
PIC setting for best fishing advantage varies, depending on fish type and location. See the
Optimum Owner’s Manual for more
information.
SOLIX Series HELIX Series
1. From the Cannon Settings menu, select the Cannon you
want to adjust (Optimum 1, 2, 3 or 4).
2. Select Pic Value .
3. Press and hold the slider, or press and hold the ENTER
key, to adjust the setting.
4. Repeat these steps for each additional Cannon.
1. From the Bluetooth Cannon menu, select the Cannon tab
you want to adjust (1, 2, 3 or 4).
2. Select PIC Value .
3. Press the RIGHT or LEFT Cursor key to adjust the setting.
4. Repeat these steps for each additional Cannon.