Johnson Gas Appliance FV34-PF2, Руководство по установке

Страница: 15 / 76

85-03-00954 15 | P a g e
PLANNING THE INSTALLATION
When planning on appliance installation, it is necessary to determine the following information before installing:

Where the appliance is to be installed.

The vent system configuration to be used.

Gas supply piping.

Electrical Wiring.

Framing and finishing details.

Hearth Protection Pad Requirements.

Whether accessories such as a ceiling fan are desired.
Selecting Appliance Location
When selecting a location for your appliance, it is important to consider the required clearances to walls. Clearances to
Combustibles
Planning Installation
WARNING
FIRE RISK- ODOR RISK

Install appliance on hard metal or wood surfaces extending full width and depth of this fireplace.

An R-1 Rated Hearth Protection Pad [1-1/2” Thick Maximum] is required unless this fireplace is elevated at
least 6” above floor level of the room. For every 1” this fireplace is elevated, you may reduce the hearth
pad depth by 2”. If this fireplace is elevated 6” or higher no hearth protection pad is required.

Do NOT install this fireplace directly on carpeting, vinyl or any combustible material other than wood. Con-
struct chase to all clearance specifications in manual.

Locate and install appliance to all clearance specifications in manual.
40-5/8" MIN.
ROUGH FRAMING
WIDTH
16 7
16"
1458"
MIN
1458"
MIN
16 7
16"
32.9475
4658"
6578"
40-5/8"
MIN
40-5/8" MIN
ROUGH
FRAMING
WIDTH
2314"
18 5
16