OPTIONAL PARTS
TC-16002-rev.1
3-5
4
Attachment of Motion Sensor Kit
● Check to ensure that the motion sensor kit is securely attached.
(1) Run the connecting cable out from the corner pocket of the decorative panel. Connect the wiring for
the motion sensor kit to the relay connector as in the following figure.
After connecting, cover the relay connector connection with the wiring cover, and secure the wiring
cover with the plastic bands.
Corner Pocket
Decorative Panel
Connecting Cable
Motion Sensor Kit
Plastic Band
Wiring Cover
Plastic Band
Relay
Connector
Mounting Tabs A
Mounting Tab B
Mounting Tabs A
Mounting Tab B
5
After the installation work for the motion sensor kit is completed, attach the corner pocket covers (3).
The details should be referred to in the installation manual of the decorative panel.
NOTE:
After the motion sensor kit is attached to the decorative panel, the one corner pocket cover (was
attached with decorative panel) becomes unnecessary.
NOTE:
Securely fasten the coupling hooks of the motion sensor kit to the decorative panel to avoid damage to
the mounting tabs.
(2) While pushing the wiring into the corner pocket, insert two coupling hooks at
A
to the square hole of
the decorative panel, and push the motion sensor kit in the direction of the arrow (
A
) shown at the far
right. Then, insert the mounting tab at
B
to the square hole of the decorative panel.
