Note:
VRF Smart Gateway ships with a private
myvrfsg.com SSL certificate installed to ensure
secure communication with the VRF Smart
Gateway. However, this certificate does not
indicate that it is trusted in a browser. If you
wish to install your own certificate, refer to
Adding a Private Key and Certificate to VRF
Smart Gateway
in the
VRF Smart Gateway
Network and IT Guidance Technical Bulletin
(LIT-12012341)
.
3. Read and accept the VRF Smart Gateway license
agreement.
4. The first time you log in to the VRF Smart Gateway,
the Change Password and Passphrase web page
appears. You must change the Admin password and
Wi-Fi passphrase.
Important:
After you change the Wi-Fi passphrase
or SSID, the web server restarts and
you must rejoin the VRF Smart Gateway
Wi-Fi network using the new
passphrase. On some mobile devices,
you must select and forget the original
VRF Smart Gateway Wi-Fi network
before rejoining the network with the
new passphrase.
Change the default password in the
New Admin
Password
field. Confirm the change by entering the
new password in the
Verify New Admin Password
field.
Change the Wi-Fi Passphrase in the
New Wi-Fi
Passphrase
field and click
Save
.
Once you have established Wi-Fi connection to the VRF
Smart Gateway, you can begin to configure the gateway
settings in the Settings menu as explained in the Users
Guide. When the gateway is physically connected to the
H-Link network, the VRF Smart Gateway automatically
starts to discover the VRF system and devices. View the
Device List from the VRF Smart Gateway UI to see the
discovered VRF devices.
A software update may be available for your device. Visit
or contact your nearest Johnson Controls
representative for the latest version. Refer to the
VRF
Smart Gateway User's Guide (LIT-12012385)
for
instructions on applying updates.
Reset Button Operation and
Descriptions
If you lose your password or if you want to restore the
unit to factory defaults, the VRF Smart Gateway offers
two reset functions: a
Network Reset
function that resets
Wi-Fi and Ethernet settings, and a
Reset to Factory
Defaults
function that resets all unit settings (including
user-configured VRF equipment names and descriptions).
Reset to Factory Defaults also resets your SSL certificate
to the Johnson Controls self-signed certificate that is in
the device when it comes from the factory.
For information on resetting the unit, see
Important:
To use a unit that is reset to factory defaults,
you must have the default login information
supplied in the Quick Start Guide that
shipped with the unit. The Reset to Factory
Defaults function
does not
change the
version of the application. If you did a
software upgrade, the VRF Smart Gateway
remains at the upgraded version rather than
resetting to the version that it was running
when it left the factory.
The reset button is on the side of the device, and it is
embedded into the VRF Smart Gateway housing so that
it cannot be activated by accident. To reach the reset
button, use a paper clip, pin, or similar tool.
Notes:
•
If you are connected to the network, using the reset
button disconnects you.
•
If you press the reset button for more than 9 seconds,
the reset operation is cancelled.
•
If a fault condition already exists, the reset button is
disabled.
6
VRF Smart Gateway Installation Instructions
