manualshive.com logo in svg

Johnson Controls TEC3000 Series, Руководство по установке, Страница: 29 / 48

Поделиться
Скачать
Johnson Controls TEC3000 Series Скачать руководство пользователя страница 29

TEC3000 Series On/Off or Floating Fan Coil and Individual Zone Thermostat Controllers with Dehumidification 

Capability Installation Instructions

29

8.

Set the time to the time at which the event should occur and press 

Save

.

Figure 20:  Setting the Event Time (Left) and Viewing the Event Time (Right)

9.

Press 

Save

 to save the event and press the 

Return

 icon to return to the main scheduler screen.

Figure 21:  Returning to the Main Menu

10. Press

to save and 

 

to return to the previous screen.

Overriding the Occupancy Mode

The TEC supports a manual override of all other schedule sources (for example, Schedule, Occupancy BI, and 
temporary occupancy). To override the Occupancy Mode:

1.

Press the 

Menu

 icon.

2.

Press 

Schedule.

3.

Press 

Schedule Options.

4.

Press 

Manual Occupancy Mode

 and select 

Occupied

, 

Unoccupied

, or 

No Override

.

5.

Press

to save and 

 

to return to the previous screen.

This option is also exposed to the BAS through the point OCCOVRD-MODE.

Содержание TEC3000 Series

















































Отзывы:

Нет отзывов