Johnson Controls SMART EQUIPMENT J ZF Series Скачать руководство пользователя | Manualshive

Страница: 40 / 77

background image

5566020-JIM-C-1019

40

Johnson Controls Ducted Systems

needed to keep the supply air temperature within the 5°F of the
economizer setpoint.

Sensor

In free cooling, with a demand from the zone/return sensor for
the first stage of cooling, the dampers modulate to control the
supply air temperature to the Economizer se/- 1°F.

If the economizer output is at 100%

and

the SAT is greater than

the Economizer se 1°F, the control starts a 12-minute
timer to energize a compressor output.

If at any time the economizer output drops below 100% the
timer stops and resets when the economizer output returns to
100%.

Once a compressor output is turned ON, the economizer
dampers continue to modulate to control the supply air
temperature to the Economizer setpoint.

At no time will a compressor output be turned ON if the
economizer output is less than 100%, even if the differential
between zone (or return) temperature and the current cooling
setpoint is great enough to demand more than one stage of
cooling.

If the economizer output goes to minimum position

and

the SAT

is less than Economizer setpoint -1°F, the control starts a 12-
minute timer to de-energize a compressor output.

If at any time the economizer output goes above the minimum
position the timer stops and resets when the economizer output
returns to minimum position.

If the demand for cooling from the space/return is satisfied, the
economizer output will modulate to minimum position and the
compressor outputs will be de-energized as long as their
minimum run timers have expired.

Power exhaust

Setpoints

• Economizer enable                               ON
• Power exhaust enable                           ON
• Modulating power exhaust                    OFF
• Exhaust VFD installed                           OFF
• Building pressure sensor enabled OFF
• Econo damper position for exh fan ON Percent
• Econo damper position for exh fan OFF Percent

Inputs

No inputs are present for non-modulating power exhaust.

Outputs

• 2-10 VDC from ECON on the economizer expansion

module

• 24 VAC from EX-FAN to energize the exhaust fan on the

economizer expansion module

Operation

Operation details include the following items:

a. Compares the economizer output to the economizer

damper position for exhaust fan on and off

b. Energizes the exhaust fan when the economizer output

is above the economizer damper position for exhaust fan
on

c. De-energizes the exhaust fan when the economizer

output is below the economizer damper position for
exhaust fan off

«
...
38
39
40
41
42
...
»

Содержание SMART EQUIPMENT J ZF Series














































































Отзывы:

Нет отзывов

Похожие инструкции для SMART EQUIPMENT J ZF Series

Бренд: York Страницы: 13

Бренд: Panasonic Страницы: 27

Бренд: Panasonic Страницы: 56

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 10

Бренд: Panasonic Страницы: 18

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 112

Бренд: Glaziar Страницы: 54

Бренд: BASETech Страницы: 12

Intense Pure Air XL Connect PU6080

Бренд: Rowenta Страницы: 76

Бренд: Lennox Страницы: 2

Бренд: Yumpu Страницы: 24

Arctic NG Wi-Fi Series

Бренд: Cooper & Hunter Страницы: 111

Бренд: Scent Crusher Страницы: 12

Бренд: DeLonghi Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды