Johnson Controls PGP922, Руководство по установке

Страница: 5 / 16

Configuring the temperature alerts
You can configure the temperature alerts with the settings described in the following table.
Table 2: Temperature alert configuration options
Option Action
Threshold Displays the last saved threshold value and provides the
installer with the ability to change the value using the back or
next button.
Disable/Enable Define whether the panel reports an alert or not.
Alert delay Define the amount of time the panel waits before an alert is
reported when the temperature exceeds the defined default.
The alert delay time values are: Immediately , 1 min , 2 min , 10
min (default), 15 min , 20 min , 30 min .
Restore delay Define the amount of time the panel waits before an alert is
reported when the temperature exceeds the defined default.
The restore delay time values are: Immediately , 1 min , 2 min ,
10 min (default), 15 min , 20 min , 30 min .
Mounting the device using tape
1. Peel the release liners off the two strips of double-sided adhesive tape and attach the tape to
the back of the device. See the following figure.
Figure 2: Double-sided adhesive tape placement on the device
Callout Description
A Double-sided adhesive tape
2. Place the device on the desired surface.
5 PGP922 Glass Break Detector Installation Guide
D-308652 PGP922 Rev.0