User Manual: NEO System
9
Rev.0.3
l) LINK: “Link”
Active (on) when there is a link failure between the equipment and some element of the
distributed system. Reset fault condition. If the fault persists, see chapter 5.5 for its
resolution. Amber colour.
m)
SYSTEM: “System”
Active (on) when there is a failure in the execution of the equipment's software, or in its
memory. Reset fault condition. If the fault persists, see chapter 5.6 for its resolution.
Amber colour.
2.1.4 Emergency Source Indicators
Emergency source indicators show the operating status of prerecorded messages, and the
emergency microphone.
n)
EVAC: “Evacuate”
Active (on) when the evacuate message is being broadcast in the selected voice alarm
zone. Red colour.
o)
ALERT: “Alert”
Active (on) when the alert message is being broadcast in the selected voice alarm zone.
Amber colour.
p)
EMIC: “Emergency Microphone”
Active (on) when the microphone is available to perform an emergency evacuation in the
selected zones. If the indicator is off, wait for it to be turned on, a warning sound signal
may be played. Amber colour.
2.2 Controls
Figure 2 - Controls
2.2.1 Direct Access Controls
These controls are located on the left side of the screen. They allow direct access to the
notification windows of the active states. They show extended information about operating
status and available options.