User Manual: NEO System
23
Rev.0.3
Table 16 – Microphone Input
NOTE: This connection is not compatible with standard Ethernet.
d)
Audio Line Level Output
The equipment has 8 balanced audio line level outputs, one per amplification channel.
The audio signal will be the same, routed at each amplifier.
The connection is made using 8 female euroblock type connectors of 3 contacts and pitch
3.81 mm (supplied with the unit). The wire size range for each pole of this connector is:
0.14
→
1.5 mm2 (30
→
14 AWG).
Figure 27 - Pre-amp Outputs
Marking
Description
Types
Signals
Activation
AUDIO
OUTPUTS
X
Balanced audio line level output
replicant of the signal of the
integrated amplifiers
Output
┴
+
-
NA
Table 17 - Pre-amp/Line-Level Outputs
e)
Audio Source Inputs
The NEO 8060 has 5 line-level balanced audio inputs. Input no.5 is shared with the ACSI
Bus input. When the ACSI Bus is being used, input no.5 will be disabled. Above the inputs
there is a level indicator LED which turns green when the input signal exceeds -50dB, and
red when exceeding-10dB.
The connection is made using eight female connectors euroblock type of 3 contacts and
pitch 3.81 mm (supplied with the unit). The wire size range for each pole of this connector
is: 0.14
→
1.5 mm (30
→
14 AWG).
Figure 28 - Audio Source Inputs
Marking
Description
Type
Signals
Activation
AUDIO
INPUTS
X
Balanced audio input to line level
and signal level indicator
Input
┴
+
-
Green: Level over -50 dB
Red: Level over -10 dB
Table 18 - Audio Source Input